Mr. Patriotic

This build is a bad little 9mm, using a Mean Arms Endomag setup, SLR Receiver Set and HG, Timney Trigger and Deadfoot Arms SCW Brace. Topped with Magpul Pro Iron Sites, this bad little backpack gun makes the ultimate FREEDOM Statement.

Custom 2” Barrel AR9, with a Dead Foot Arms SCW Brace, making the nickname “Why Not” an example of just what we can do and what can be done to the AR9 platform. Measuring in at 13 3/8” inch, she fits just about anywhere you want to put it.

Nicknamed “Lil Nina”, this beauty features our first fully machined 2.5” barrel made off my design for the feed ramp. Utilizing an SLR receiver set, our custom SLR Handguards and a Maxim Defense SCW Brace gets it to a very useable, very appealing 15 1/2”. Also using a Mean Arms “EndoMag” converted to a 20rd set up, it just screams backpack gun.

Nicknamed “Chode” this lil guy is running a 5.25” barrel and a 4.25” HandGuard allowing a direct thread SiCo Omega9k to be used. Other upgrades are a Timney PCC Trigger and a Maxim CQB Brace. Quiet and Functional is this guys specialty.

Woody, properly named is using as much Battle Arms Development components as possible. Up front is a BAD 6.7” Rigid Hand Guard with a wood grip attachment, custom mounted for clearance with the custom length barrel and SLR linear comp. Our Breacher’s Glock Mag lowers and New Frontier upper filled with BAD components, Timney Trigger, and BAD wood Grip. On the tail is a BAD PCC Vert Stock with Wood Cheek rest attachment. Coloring is called Tungzooka by Deadlock Coatings.

This AR9 has a two tone scheme obviously using the Deadpool red up front and for the buffer tube and Distressed Tac Gray for the upper/lower. Typical upgrades include the Timney PCC trigger, Maxim Brace and a slew of other goods.

Starting up top is a 5” 300blk that is cerakoted in the Deadpool red and distressed Tac Gray. Topped with a Trijicon MRO and a Trijicon Magnifier as well as Magpul Pro Irons. Other goods include a 5” SLR 300blk Barrel, SLR Comp, Maxim SCW Brace and the usually internals with the Timney AR15 trigger, Battle Arms components and and bunch of other goods on a SLR receiver set.

On the bottom is a 2.5” AR9, using a SLR Receiver set, Maxim SCW Brace, SLR Hand Guard and Linear Comp. Utilizing the “EndoMag”, this little pocket AR9 is a great addition to the 5” 300.

Small Frame Coyote Killer

This build was for a customer up in Michigan who loved to shoot coyotes as well. He sought me out with a large budget in mind and a request for 6.5Grendel which is another great, flat shooting round capable of some amazing distances. An odd request on this build was it to be a LEFTY Side Charger. I found this task a little more difficult at first thinking about the parts situation and knew there would be very little out there that met the request. I sought out Gibbz Arms as they make a billet, side charger for lefties receiver. After this find, I went with Black Rain Ordnance for the lefty Bolt Carrier in .223 and ended up finding a guy who had a couple left hand bolts for 6.5G with Alexander Arms extractors. Barrel, I figured 20″ would suffice for the distances the owner wanted and I sought out Satern Barrels for this project. Handling the muzzle end I found a nice brake and ended up contouring it to match the barrel for a sharp clean look. Handling the Fire Control Group, again I went with JP Rifles, and a JP Silent Capture Buffer Spring was put in to control the recoil quietly. JP was also used for the Hand Guard and I went with a 17″ Mk3 Guard. Handling the butt end, the customer wanted the Magpul PRS and that’s exactly what was put on. Sitting on top of this old girl is a Burris XTRII, 5-25×50 SCR MOA scope. With the customer living in Michigan and me having to ship this beast, I suggested a Pelican 1720 case and I cut the foam to fit her for a perfect fit. Check out the Pics!

This customer had the ultimate CQB rifle in mind with this guy and spared no expense with any part of this build. A long list of goods include SLR Receiver Set, Cloud Defensive OWL Light, Vltor IMod stock, Geissele SPR 42 braided spring and buffer set up, Daniel Defense MK18 10.3” barrel, fitted with a Dead Air Brake, Timney AR15 trigger, Battle Arms Titanium TD Pins, topped with a Elcan Spectre 1.5-6, a Trijicon RMR on a Arisaka 45* Mount and finally finished off with a SiCo Omega 300 using a Dead Air Keymo Mount.

This guys comes with a 3″ AR9 Upper, as well as a 5″ 5.56 complete gun using a SLR receiver set and EndoMag set up for the 9mm upper and regular Pmags for the AR-15 when you pop it on.  Such a great little package filled to the max and Cerakoted in Dark GeoCam.

Distressed White and Skulls was the request from this customer.  By god we nailed it with this one.  Filled with tons of goods, the key to happiness and the customer getting what they want.  This truly defines Custom and what we do.

This was a full size build with a customer request of “Different” cerakote with hints of red under black. Usually this is a hit or miss with coatings and I think we hit a home run with this one. 14.6” HG, 16” barrel and a SLR comp on one end, BCM Stock on the other.

What can I say about this build?  Sitting at 17″ collapsed, this build defines a Backpack Gun.  Adding a little flare with the Iron City Rifle Works “Berserker” Upper and their C4V coated Bolt, she looks great.  This one is fitted with a 3″ Spinta Precision barrel, 3″ New Frontier hand guard, Maxim Defense CQB Brace and a host of other goodies.  Testing wise, thru 8 mags on initial testing, not one malfunction.  Stay tuned for more!

What better caliber can you suppress than a 300 blackout. So this build had to be reliable and functional. Starting with the muzzle end again I went with an AAC SDN-6 suppressor attached to an AAC 3 prong QD Flash hider. These two are attached to a 10″ Aero Precision Barrel and surrounded by an Aero Precision builders kit 9″ hand guard. Handling the rounds is an Aero Precision Nitrided BCG and charging duties were again left to Radian and I went with the SD-SL model. Attaching these items to the rest of the gun is the Aero Precision Upper and pinned to that is the matching Aero M4E1 Lower. Housed inside this lower is an Elftmann Flat face trigger. Holding the trigger down and in is a set of KNS pins. Sitting atop the upper is a Rudolph 1-6 SFP optic held down by an Aero Precsion offset mount. Pistol grip is a Magpul K2+ and handling the butt end duties is a Magpul SL-S. This has been such a great shooter. Check out the pics!

50 Shades of FDE

Oh the Buttsy—–This little AR-9 Pistol was built for a local Instagram celebrity who goes by the name The Buttsy. He’s a major golf enthusiast and is starting to dip is pinky into weapons. I built this for him on his request of a short, FDE and Black, 9mm AR Platform build. Starting off with the Receiver side, I went with Aero Precision for the upper Receiver and Matrix for the Lower Receiver. Barrel is a new modified Orien Barrel, cut to a custom length for proper look. Muzzle blast is handled by a Noveske KX5 Pig Flash hider and all is covered by an Aero FDE Atlas S-One 7.5″ hand guard. Keeping his hand in check is a BCM KAG hand stop. Charging the Foxtrot Mike FM-9 BCG is our standard Radian Raptor Charging Handle. Sitting a top of the Upper Reveiver is a Low Mount Trijicon MRO. Onto the Matrix Lower, handling the firing duties is a Geissele SSA-E Trigger, secured by proper .1550 KNS Gen G pins specifically made for Geissele Triggers. Handling the “Butt” end of the stick is a Maxim Defense CQB Pistol Brace with a JP Silent Capture Buffer Spring made for 9MM applications. The cream of the crop is a Coyote Brown Glock 18 Magazine holding 33 rounds of 9mm ammo. Fully collapsed we’re measuring approx 22″, easily fitting in a backpack as pictured.

What started out as an AR9, ended up being a package deal with a Custom AR9, Beretta M9A3 and Glock 45, all custom cerakoted. This was also housed in an OD Green Pelican 1700 and custom cut/lasered for the customer and shipped out.

The AR9 includes a Maxim Defense CQB Brace, Taccom Extreme 9mm Bolt and Taccom Extreme 5.25″ Barrel all housed in a New Frontier Armory Lower, Side Charge Upper and SLR Hand Guard. Accessories like a Geissele SSA-E Trigger, Battle Arms Ambi Safety, Bolt Catch and Enhanced TD Pins as well as Odin Works Ext Mag Release and a Fab Defense Folding Pistol Grip.

One of these pistols is a Glock 45 with a Cerakoted Frame, and Custom OD Green Digital Camo job. The second Pistol was a Beretta M9A3 all done in custom color as well. This package was a blast to finish.

Unicorn Liberal Hater

What can I say about this build…Lets piss off a Liberal seems to sum it up. Starting with the Muzzle end is a SilencerCo Omega 300 to keep the weight down. The SilencerCo ASR brake is threaded to a 10.3″ Daniel Defense, Cold Hammer Forged, Chrome Lined Mk18 Barrel. Surrounding this bad ass barrel is a Geissele Mk14 hand guard. This barrel is then attached to an Aero Precision Upper. Since this will be used in CQB situations/courses as well as low lighting fundamentals, I went with the best being a Surefire light. Due to this being a SBR, I decided to go with a Surefire M300C, Sure fire pressure pad and housed it in a Cloud Defensive pressure pad mount placed directly above a BCM Mod3 Vertical Grip. Also sitting atop the upper used to be a Trijicon MRO but has since changed to an Eotech EXPS3-4 with a G33 Magnifier. For Back Up Iron Sites, I used a Daniel Defense Fixed front site and a Troy Folding rear for when the G33 is out of the way. Handling the rounds is a Lantac BCG and Charging duties were left to the Radian Raptor SD Charging handle. Handling the Recoil is a Vltor A5 system which is an Intermediate Buffer tube and a rifle length spring with H2 buffer. Handling the butt end duties is a Vltor EMOD. Moving down to the lower, it had to be a Spikes themed and a Unicorn Safe Space lower. Being full libturd, I had to go with one of the best triggers out there and used a Geissele Super Select Fire trigger. Holding this amazing trigger is a set of KNS pins. This was such a great build and has been a great running machine so far. Check out the pics

Dubbed the “Avocado”, this build turned out fantastic!  Aero Precision OD Green Builders set was the start of this build and in it no expense was spared.  Starting with the Pistol Brace, it had to have the new Maxim Defense SCW brace with H2 upgrade, from there moving forward, an Elftmann Trigger, KNS Pins, Radian Talon Ambi Safety, Geissele Airborne Charging Handle, Holosun 503GU Optic with a Geissele Super Precision Mount.  Barrel is a 7.5″ Ballistic Advantage unit.

Precision at its Finest

This is an AR-10, chambered in the deadly accurate, flat shooting 6.5 Creedmoor. This build started off with the tried and trued Aero Precision Upper/Lower combo and I went with a JP Rifles Handguard to help cover the Criterion/Fulton 24″ Stainless Bull barrel. Gas is carried by a .936 Adjustable Gas Block and muzzle rise is controlled by a JP Cooley Large Brake. The Bolt Carrier is yet held again by the best being JP Rifles and I went with the Stainless Low Mass Carrier since I am running an Adjustable Gas block. The bolt was upgraded to the HP bolt from JP as well. Backing the BCG is JP’s SCS in the Heavy version. Firing Control is a JP Armageddon Gear Revolution Roller held in by JP Anti Walk pins. For the rear of the rifle I went a little lighter than the typical Magpul PRS and went with a Ruger Precision Butt taken off of a RPR rifle. Sitting on top of this beast is a Burris XTRII, 5-25×50 SCR Mil Scope, housed in a LaRue QD mount. Finally, supporting this old girl is an Atlas Bipod and Atlas Monopod. Check out the Pics!

Additional Information

Customer brought in a Daniel Defense DDM4V7 to set up a little better for his tastes. First up was the muzzle device. The DD muzzle device wasn’t the right look for the customer so I replaced it with a tucked Noveske KX5 Flash Hider. This required shortening the 16″ Barrel. So off came the hand guard to remove the barrel. The barrel was cut to the length I deemed proper. Barrel was cut, threaded and the Noveske was timed to proper alignment, then Pinned and Welded per ATF Regulations. Next came the Trigger, Ambi Safety, KNS Pins and finally topped with a Primary Arms 1-6 FFP w/ACSS Reticle in an ADM Mount. Sometimes its the minor adjustments that just set it off.

Who Likes MP5 Mags?

This build I thought of to make an extremely reliable, MP5 mag fed AR9 with folding Pistol Brace. For reliability I reached out to the Owner of Taccom and ordered up an Extreme Bolt and Extreme 9mm barrel with extended feed ramp. Housing these items I went with New Frontier, billet side charger and billet lower they are calling C5 that houses a MP5 mag. Due to the feed ramp set up already in the lower housing, and the extended feed ramp of the Taccom barrel, the feed ramp on the barrel needed to be cut down .030 for clearance. Covering the barrel, I went with an SLR ION Ultra Light hand guard and their Liner Comp for 9mm. Handling the buffer end is a Kaw Valley Buffer and Extra Power spring as well as an SBA3 Brace. Optic, I went with the tried and true Holosun 510C. Initial testing, 5 mags with zero hiccups. As usual, its perfect before it leaves.

AR-10 .243 Win, DeadAir Sandman Ti

I was approached by this customer with a no holds barred budget of being deadly accurate with only top quality parts. He advised me that he loads for .243 already so he wanted this build in a gas gun instead of his typical bolt guns. He said he wants to kill coyotes and wanted high quality. So off I went, coming up with parts for the build, catering to his high quality budget. It started with an “Ammo Can” builders set from Aero Precision being a matched upper/lower and hand guard. Next came a really good barrel, able to retain the heat for rapid follow up shots. I went with a Dracos barrel and felt their +2 gas system would help this High Pressure build even more. For the end of the Muzzle, on went an Area 419 Hellfire brake when its not suppressed with the Dead Air Sandman Ti. I went to the best for the Bolt Carrier Group being JP Rifles. I selected the Variable Mass QPQ Bolt Carrier and their HP bolt. Supporting the Carrier it is backed with a Variable Mass Silent Capture Buffer Spring. Charging the JP products is a Radian Raptor SD Charging handle. The Firing Control Group is being handled by an Elftmann Tactical AR-10 Trigger with Heavy Hammer Spring. The trigger is secured by KNS Anti Rotation/Walk pins. Sitting on top of this beast for now is a Nightforce NX8 1-8 F1. Check out the pics!

Customer Request of a Storm Trooper themed build. This package started off as a basic AR9 and we added some color keeping the balance of white/black in mind and leaving accessories in black.

Included in this basic build is a 5.5″ Ballistic Advantage 9mm barrel, with a tucked Noveske KX5 Flash hider, running a FM9 Bolt from Foxtrot Mike, Battle arms Development Ambi Safety, KNS Anti Rotation/Walk pins, Radian Raptor Charging handle, BCM Pistol Grip and Finished off with a SB Tatical SBA3 Brace.

13.5″ 308 Build

So, the shorty 308. I went pretty extravagant with this build and ordered a Falkor Defense, Dracos “Straight Jacket” 13.5″ barrel. Handling the cycling duties is a JP Rifles Variable Mass BCG and JP Silent Capture Buffer Spring with H2 weights. These are charged by a Radian Raptor Charging Handle. Trigger is a Geissele SSA unit secured with KNS Precision .1550 pins. Take Down pins are Battle Arms Development Enhanced and Battle Arms Ambi Safety as well. Feeding this beast is a Lancer Translucent FDE 20 Rd Mag filled with Fort Scott Munitions 308 ammo. Topped with a Nightforce 2-10 Optic in a LaRue QD Mount. Taming the noise is a Dead Air Sandman Ti Suppressor as an option or as seen in the gallery, an Aero Precision VG6 Self Timing Brake. Handling the butt end of things is an SB Tactical SBA3 Pistol Brace. Supporting the barrel end is a rebranded AccuTac Bipod, sold by Falkor Defense.

Another great project finally comes to be. Customer sought me out for an Aero Precison Builders kit and we turned it into a hell of a build. Starting with the kit, I chose the Daniel Defense 10.3″ Chrome Lined, CHF, optimized for suppressed action barrel, Geissele Gas Block and Tube, and a Dead Air Sandman S Suppressor. Working back and at the Heart of this beast is a Lantac Enhanced BCG, again optimized for suppressed action. Charging the Lantac BCG is a Radian Raptor SD-SL Charging handle which is vented to direct gasses away from the shooter. From there went in a Elftmann Straight shoe trigger, FDE KNS Pins, Battle Arms Ambi Safety, Battle Arms Ext Mag Release, Geissele Maritime Bolt Catch and finally a Magpul MOE + Grip. For the butt end of the stick is a Maxim Defense CQB Brace with a JP Heavy, Silent Captured Spring. Topping this guy is a Holosun 503GU FDE Optic with a Geissele Super Precision Mount.

Back Pack Gun

The ultimate goal with this weapon was ultra compact, subsonic and home defense. This build started off with an Aero Upper and Lower receiver and a SLR 300blk out barrel measuring 5″, and an SLR 4.25″ Hand Guard. Internals include an Aero LPK, Geissele SSF trigger, KNS Gen G pins, Battle Arms Enhanced Take down pins, Battle Arms, FA Ambi Safety and Battle Arms Ext Mag Release. Handling the bolt catch is a Geissele Maritime unit. Due to travelling with this weapon, on went a Fab Defense folding Pistol Grip. Handling the butt end of this unit is a newly developed Maxim Defense SCW Brace with H3 buffer upgrade. Charging the proprietary Bolt is as always a Radian Raptor SD-SL Charging handle. Up top, handling the optic side is my favorite Trijicon MRO. Muzzle end of the game is a Dead Air Sandman K suppressor. Light duties are left to the newly released Cloud Defensive OWL light.

Small Frame Coyote Killer

This build was for a customer up in Michigan who loved to shoot coyotes as well. He sought me out with a large budget in mind and a request for 6.5Grendel which is another great, flat shooting round capable of some amazing distances. An odd request on this build was it to be a LEFTY Side Charger. I found this task a little more difficult at first thinking about the parts situation and knew there would be very little out there that met the request. I sought out Gibbz Arms as they make a billet, side charger for lefties receiver. After this find, I went with Black Rain Ordnance for the lefty Bolt Carrier in .223 and ended up finding a guy who had a couple left hand bolts for 6.5G with Alexander Arms extractors. Barrel, I figured 20″ would suffice for the distances the owner wanted and I sought out Satern Barrels for this project. Handling the muzzle end I found a nice brake and ended up contouring it to match the barrel for a sharp clean look. Handling the Fire Control Group, again I went with JP Rifles, and a JP Silent Capture Buffer Spring was put in to control the recoil quietly. JP was also used for the Hand Guard and I went with a 17″ Mk3 Guard. Handling the butt end, the customer wanted the Magpul PRS and that’s exactly what was put on. Sitting on top of this old girl is a Burris XTRII, 5-25×50 SCR MOA scope. With the customer living in Michigan and me having to ship this beast, I suggested a Pelican 1720 case and I cut the foam to fit her for a perfect fit. Check out the Pics!